Pneumatic Linear Actuators Assignment Example | Topics and Well Written Essays - 1500 words

Pneumatic Linear Actuators - Assignment Example This pneumatic linear actuator particularly works by moving the barrel forward against the mold and back away from the mold in successive sessions. The linear force applied on the injection piston forces the molten plastic polymer to flow into the sprue hole of the mold where molten thermosetting polymer assumes the shape of the contours of the mold (Malloy, 2004, 41). For example, during the mechanical activity of the machine, the piston in the hollow cylinder is pushed by air causing it to produce energy in the form of motion. Â  This is the last pneumatic linear actuator used that operates by opening and closing the mold. The mold cavity then determines the shape of the polymer before the final product is pushed by the linear actuator into the final stage involving the cooling of the product. For example, while the cooling of the already molded product is in progress, Mould Clamp Linear Actuator is used to hold and clamp the plates of the mold together until the final product cools and hardens into the desired shape. In this regard, the clamping procedure is primarily used to determine the finished product’s final shape. Â  There are a number of inputs and outputs required for a control system that will ensure that to ensure that the injector is always back to its original position.